Can I do any electrical work myself? +
You can legally carry out minor electrical work such as replacing light switches, sockets (like-for-like), and light fittings without notifying building control. However, you must not add new circuits, work in bathrooms or kitchens (within zones), replace a consumer unit, or install outdoor wiring unless you are Part P registered. DIY electrical work is a leading cause of house fires — if you are unsure, always call a qualified electrician in Burslem.
My RCD keeps tripping — what should I do? +
An RCD that keeps tripping is detecting an earth leakage fault, which could be a sign of damaged wiring or a faulty appliance. Start by unplugging all appliances on the affected circuit, then reset the RCD. Plug each appliance back in one at a time to identify the culprit. If the RCD trips with nothing plugged in, the fault is in the fixed wiring and you need an electrician in Burslem to trace and repair it.
Is a tripping circuit breaker dangerous? +
A circuit breaker that trips occasionally is doing its job — protecting you from overcurrent. However, frequent or immediate tripping indicates an underlying fault such as a short circuit, overloaded ring main, or deteriorated cable insulation. Do not simply keep resetting it, as this bypasses the protection that is keeping you safe. Have an electrician in Burslem diagnose the cause before using the circuit again.
What is the difference between an RCD and an MCB? +
An MCB (Miniature Circuit Breaker) protects against overcurrent and short circuits — it is the modern equivalent of a fuse. An RCD (Residual Current Device) protects against earth leakage, which is what can kill you if you touch a live wire. Modern consumer units use RCBOs, which combine both functions into a single device per circuit, giving you the best protection. If your consumer unit still has rewirable fuses, it is overdue for an upgrade.
What should I do if I have a complete power cut in Burslem? +
First, check whether your neighbours also have no power — if so, it is likely a supply fault and you should call your local distribution network operator (DNO), not an electrician. If it is only your property, check your consumer unit for tripped switches. If the main switch will not stay on, or keeps tripping immediately, do not keep resetting it — call an emergency electrician in Burslem as there may be a serious fault on one of your circuits.
Will the electrician give me a quote before starting work? +
Yes — a professional electrician will diagnose the fault and provide a clear quote before beginning any repair work. For emergency call-outs, they will explain the call-out fee upfront and then quote for the repair once the fault has been identified. You should receive a Minor Electrical Installation Works Certificate or full Electrical Installation Certificate depending on the scope of the job.