How often should I have my electrics inspected? +
The IET Wiring Regulations recommend an electrical inspection (EICR) every 10 years for owner-occupied homes, every 5 years for rented properties (this is a legal requirement for landlords), and every 5 years for commercial premises. If your home was built before 1980 or has never been inspected, it is worth booking an EICR sooner. The inspection will identify any deteriorated wiring, missing earthing, or outdated components.
Why do my lights flicker in Cardiff? +
Occasional flickering is usually caused by a loose bulb or a poor connection at the light fitting. Persistent flickering across multiple lights can indicate a loose neutral connection at the consumer unit, a faulty main switch, or an issue with the incoming supply. If all lights in your home flicker simultaneously, this could be a supply-side issue — contact your DNO first. Otherwise, have an electrician in Cardiff check the connections at your consumer unit.
What should I do if a socket is sparking? +
Stop using the socket immediately and switch off the circuit at the consumer unit. Sparking when plugging in can sometimes be normal (a brief blue flash), but persistent sparking, blackening around the socket, or a crackling sound indicates a serious wiring fault. Do not attempt to remove the socket faceplate yourself — call a qualified electrician in Cardiff to inspect and repair it safely.
How long does a consumer unit replacement take? +
A consumer unit replacement in Cardiff usually takes 4 to 8 hours, depending on the number of circuits and the condition of the existing wiring. Your electricity supply will be off for most of this time, so plan accordingly — charge phones, fill flasks, and move any frozen food to a cool bag. The electrician will test every circuit before restoring power.
My RCD keeps tripping — what should I do? +
An RCD that keeps tripping is detecting an earth leakage fault, which could be a sign of damaged wiring or a faulty appliance. Start by unplugging all appliances on the affected circuit, then reset the RCD. Plug each appliance back in one at a time to identify the culprit. If the RCD trips with nothing plugged in, the fault is in the fixed wiring and you need an electrician in Cardiff to trace and repair it.
Can I do any electrical work myself? +
You can legally carry out minor electrical work such as replacing light switches, sockets (like-for-like), and light fittings without notifying building control. However, you must not add new circuits, work in bathrooms or kitchens (within zones), replace a consumer unit, or install outdoor wiring unless you are Part P registered. DIY electrical work is a leading cause of house fires — if you are unsure, always call a qualified electrician in Cardiff.