What should I do if I smell burning from a socket or switch? +
Switch off the circuit at the consumer unit immediately and unplug everything from the affected socket. Do not use the socket again until it has been inspected by a qualified electrician. A burning smell from electrical fittings usually indicates overheating caused by loose connections, overloaded circuits, or deteriorated wiring — all of which are fire hazards. Call an emergency electrician in Oxford straight away.
Can I do any electrical work myself? +
You can legally carry out minor electrical work such as replacing light switches, sockets (like-for-like), and light fittings without notifying building control. However, you must not add new circuits, work in bathrooms or kitchens (within zones), replace a consumer unit, or install outdoor wiring unless you are Part P registered. DIY electrical work is a leading cause of house fires — if you are unsure, always call a qualified electrician in Oxford.
How often should I have my electrics inspected? +
The IET Wiring Regulations recommend an electrical inspection (EICR) every 10 years for owner-occupied homes, every 5 years for rented properties (this is a legal requirement for landlords), and every 5 years for commercial premises. If your home was built before 1980 or has never been inspected, it is worth booking an EICR sooner. The inspection will identify any deteriorated wiring, missing earthing, or outdated components.
What is Part P and why does it matter? +
Part P of the Building Regulations covers electrical safety in dwellings. Certain types of electrical work — including new circuits, consumer unit replacements, and work in bathrooms or kitchens — are classed as notifiable and must either be carried out by a Part P registered electrician or inspected by building control. Using a registered electrician saves you the building control fee (typically £200–£300) and ensures the work is properly certified.
Why do my lights flicker in Oxford? +
Occasional flickering is usually caused by a loose bulb or a poor connection at the light fitting. Persistent flickering across multiple lights can indicate a loose neutral connection at the consumer unit, a faulty main switch, or an issue with the incoming supply. If all lights in your home flicker simultaneously, this could be a supply-side issue — contact your DNO first. Otherwise, have an electrician in Oxford check the connections at your consumer unit.
My RCD keeps tripping — what should I do? +
An RCD that keeps tripping is detecting an earth leakage fault, which could be a sign of damaged wiring or a faulty appliance. Start by unplugging all appliances on the affected circuit, then reset the RCD. Plug each appliance back in one at a time to identify the culprit. If the RCD trips with nothing plugged in, the fault is in the fixed wiring and you need an electrician in Oxford to trace and repair it.